Icom ID-51A PLUS2 Advanced Owners Manual - Page 236
VFO frequency and a Memory/Bank scan
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Previous view 14 PRIORITY WATCH ■■VFO frequency and a Memory/Bank scan Sequentially checks the Memory or Bank channels every 5 seconds, while receiving on a VFO frequency. 1. Set the VFO frequency q Push [V/MHz] to select the VFO mode. w Rotate [DIAL] to set the receive frequency. Example: Sequentially checks the Memory channels every 5 seconds, while receiving on 145.800 MHz. Rotate [DIAL] to set the receive frequency. Push [M/CALL] . 2. Start the Memory or Bank scan • To select a Memory scan q Push [M/CALL] to select the Memory mode. w Hold down [SCAN] for 1 second. e Push D-pad() to select the scan type, and then push D-pad(Ent) to start the Memory scan. (p. 13-9) D-pad (Ent) () • To select a Bank scan q Push [M/CALL] to select the Memory mode. w Hold down [SCAN] for 1 second. e Push D-pad() to select the scan type, and then push D-pad(Ent) to start the Bank scan. (p. 13-10) How to select the Memory and Bank: z In the Memory mode, push [QUICK] . x Push D-pad() to select "Bank Select," and then push D-pad(Ent). • The Bank list is displayed. c Push D-pad() to select a desired bank and then push D-pad(Ent). • If "OFF" is selected, the bank selection is can- celed. 3. Start the Priority watch q Push [QUICK] . w Push D-pad() to select "PRIO Watch," and then push D-pad(Ent). e Push D-pad() to select "ON" or "Bell." • ON: W hen a signal is received on the priority channel, the channel is automatically selected. • Bell: W hen a signal is received on the priority channel, the " " icon is displayed in the VFO mode. r Push D-pad(Ent) to start the Priority watch. • The "PRIO" icon appears Hold down [SCAN] for 1 second. Push D-pad() to select, then push D-pad(Ent). Blinks Blinks Push [QUICK] . Push D-pad() to select, then push D-pad(Ent). Push D-pad() to select, then push D-pad(Ent). [DIAL] NOTE: Push [CLR] to cancel the Priority and Memory/Bank scan at the same time. ☞☞Continued on the next page. 14-6