Icom ID-51A PLUS2 Advanced Owners Manual - Page 111
Speech function
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Previous view 9 D-STAR OPERATION ■■Speech function The speech function announces the called station call sign, or the individual or station call sign that is selected from the RX History by holding down and rotating [DIAL]. It is convenient when you cannot watch the LCD, or you missed the call's audio. This function helps you to know the call sign of the call- er station without looking at the LCD. DDAnnouncing the received call sign The received call sign can be announced. qqPush [MENU] . wwP ush D-pad() to select the root item ("SPEECH"), and then push D-pad(Ent). D-pad (Ent) () eePush D-pad() to select "RX Call Sign SPEECH," and then push D-pad(Ent). rrPush D-pad() to select "ON (Kerchunk)" or "ON (All)." • ON (Kerchunk): W hen a DV call is received, and if the call time is short, the calling station's call sign is announced. (Default) • ON (All): When a DV call is received, the calling station's call sign is announced. ttPush [MENU] to save, and exit the MENU screen. • When a DV call is received, the standby beep sounds, and after approximately 1 second, the call sign is an- nounced. NOTE: • Even if a "/" and a note are after a call sign, they are not announced. • The announced contents cannot be recorded on the microSD card. • The transceiver has other Speech functions: [DIAL] speech function The frequency or repeater call sign is announced 1 second after [DIAL] selection. (MENU > SPEECH > DIAL SPEECH) Mode speech function The selected operating mode is announced when [MODE] is pushed. (MENU > SPEECH > MODE SPEECH) • When the digital squelch function is used, and if a received signal is not addressed to your call sign, or does not include an unmatched digital code, the calling station's call sign is not announced. • When "ON (Kerchunk)" is selected 'JM1ZLK' • When "ON (All)" is selected 'Are you listening?' 'JM1ZLK' 9-16