Icom ID-51A PLUS2 Advanced Owners Manual - Page 86

Previous view 8 D-STAR OPERATION ■■Setting "TO" (Destination) (Continued) DDDirectly inputting (RPT) The destination repeater call sign can be directly input. qqHold down for 1 second. • The DR screen appears. wwPush D-pad() to select "TO," and then push D- pad(Ent). D-pad (Ent) () eePush D-pad() to select "Direct Input (RPT)." rrPush D-pad(Ent) to enter the edit mode. ttRotate [DIAL] to select a desired character. (Example: J) • A to Z, 0 to 9, / and a space can be selected. • R otate [DIAL] counterclockwise to enter a space. • Push [CLR] to delete the selected character, or hold down [CLR] to continuously erase the characters, first to the right, and then to the left of the cursor. yyPush D-pad() to move the cursor to the second digit. uuRepeat steps t and y to enter a name of up to 8 characters, including spaces. (Example: First, J, then P, then 3, then Y, then D, then H.) iiAfter entering, push D-pad(Ent) twice. • "JP3YDH" is displayed in "TO." • After entering, you can correct the call sign in the DI- RECT INPUT (RPT) screen. • The entered call sign remains on the DIRECT INPUT (RPT) screen, until entering a new call sign. [DIAL] Example: Directly input the call sign "JP3YDH" TIP: If the entered call sign is duplicated in the Repeater List, the name is displayed. (Only when the name has been entered.) Completed The following settings are also correct. The repeater node* is input. "/" is input. In this case, the call sign is of a repeater for a Gateway call. *Although the repeater node letter is 'B' for 430 MHz band, 'A' is used in Japan. See page 8-1 for details. 8-15