Icom ID-51A PLUS2 Advanced Owners Manual - Page 221
When a signal is received, Scan name, Scan Stop Beep function, Scan function during Dualwatch opera
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
Previous view 13 SCAN OPERATION ■■Scan (Continued) DDWhen a signal is received When a signal is received, the scan pauses for approximately 10 seconds (default), then resumes. The scan resumes approximately 2 seconds (default) after the signal is disappears. To manually resume the scan, rotate [DIAL]. • These settings can be changed in the MENU screen. (p. 16-18) (MENU > Scan > Pause Timer) (MENU > Scan > Resume Timer) DDScan name A desired name can be assigned to each PROGRAMCH (**A/**B). (p. 12-10) By selecting the scan name, the scanning frequency range will be set. Blinks Blinks The S-meter shows the received signal strength. Scan name "Scan 0" DDScan Stop Beep function The Scan Stop Beep function sounds a beep when a signal is received. The function can be turned ON in the MENU screen. (p. 16-90) (MENU > Sounds > Scan Stop Beep) The scan type selecting screen. DDScan function during Dualwatch operation When the scan function is used during the dualwatch operation, the SUB band audio signal may be muted, depending on the operating band or mode. And, the audio output may be interrupted when the frequency or operating mode is switched while scanning. ❍ SUB band mute status MAIN band DV mode FM-N mode AIR band SUB band DV mode FM-N mode DV mode FM-N mode AIR band Example: F ull scan is running on the MAIN band, and the AIR band is selected on the SUB band. MAIN band SUB band When an AIR band frequency is scanned on the MAIN band, the SUB band audio signal is muted. 13-4