Icom ID-51A PLUS2 Advanced Owners Manual - Page 275
Program Link
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
Previous view 16 MENU SCREEN ■■Scan items (Continued) Program Link Scan > Program Link (Default: Refer to the diagram below) This item sets the link function for more than two pair of Program Scan Edge channels to be sequentially scanned during the Program Link Scan. The link function scans all frequencies in the scan range. Default settings of the Program Link The Program Scan Edge channels "01" and "02" are set in the Program Link number "0" as the Default. Program Link 0ɿ Edit Name 01ɿ144.000−148.000 02ɿ420.000−450.000 ... 1ɿ Blank 9ɿ Program Link number (0ʙ9) Program Scan Edge channel • The Program Link number screen shows the frequency range. (The scan edge frequency may differ, depending on the transceiver version.) • A link setting can be added when more than two pairs of Program Scan Edge channels are entered. (p. 13-2) Push Program Link number screen NOTE: The "Add" item will not be displayed when only one pair of programmed scan edge channels are entered, or no programmed scan channel (00 to 24) is left to add to the selected link channel. Adding a Scan Edge channel to the Program Link qqP ush D-pad() to select a Program Link number between 0 and 9, where you wish to add a Scan Edge channel, and then push D-pad(Ent). D-pad (Ent) () wwPush [QUICK] . eeP ush D-pad() to select "Add," and then push D-pad(Ent). rrP ush D-pad() to select a programmed scan number you wish to assign to the selected link channel, and then push D-pad(Ent). (For example: 00: 144.000-450.000) ttPush [MENU] to exit the [MENU] screen. 16-20