Icom ID-51A PLUS2 Advanced Owners Manual - Page 379
DTCS code and polarity setting, DV TX call signs setting, Digital code squelch setting, DV MY call
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 379 highlights
9999 Previous view 17 OTHER FUNCTIONS ■■CI-V information (Continued) • DTCS code and polarity setting Command : 1B 02 q* w e XX0XXX • Character's code of the call sign Character ASCII code 0 ~ 9 30 ~ 39 A ~ Z 41 ~ 5A (Space) 20 / 2F 0 (fixed) First digit: 0~7 Second digit: 0~7 Third digit: 0~7 Receive polarity: 0: Normal 1: Reverse Transmit polarity: 0: Normal 1: Reverse *See page 16-17 for DTCS code list. • Digital code squelch setting Command : 1B 07 qw q 999 X X L First digit: 0~9 Second digit: 0~9 • DV MY call sign setting Command : 1F 00 Set your own call sign and note of up to 12 characters. q-i o-!2 X X ••• X X X X X X X X X X q ~ i : Your own call sign setting (8 characters) o ~ !2 : Note setting (4 characters) • DV TX call signs setting (24 characters) Command : 1F 01 Set "UR," "R1" and "R2" call signs of 8 characters (fixed). q-i o-!6 !7-@4 X X ••• X X X X ••• X X X X ••• X X q ~ i: UR (Destination) call sign setting (8 characters) o ~ !6: R1 (Access/Area repeater) call sign setting (8 characters) !7 ~ @4: R2 (Link/Gateway repeater) call sign setting (8 characters) • DV TX message setting Command : 1F 02 Set the transmit message of up to 20 characters. "FF" stops sending or reading messages. Character ASCII code Character ASCII code A ~ Z 41 ~ 5A a ~ z 61 ~ 7A 0 ~ 9 30 ~ 39 Space 20 ! 21 # 23 $ 24 % 25 & 26 \ 5C ? 3F " 22 ' 27 ` 60 ^ 5E + 2B - 2D ✱ 2A ⁄ 2F . 2E , 2C : 3A ; 3B = 3D < 3C > 3E ( 28 ) 29 [ 5B ] 5D { 7B } 7D ¦ 7C _ 5F ¯ 7E @ 40 • DV RX Status setting Command : 20 0201, 20 0202 Data Function Description bit7 0 (Fixed) - bit6 0/1 Receiving a While receiving a digital voice voice call signal, select "1." (Regardless of DSQL and CSQL setting) bit5 0/1 Last call finisher When the last call was finished by you, select "1." bit4 0/1 Receiving a signal When the audio tone can be heard, select "1." bit3 0/1 Receiving a BK While receiving a BK call, select call "1." bit2 0/1 Receiving a While receiving a EMR call, EMR call select "1." bit1 0/1 Receiving a When "DV" and "FM" are blinking, signal other than select "1." DV bit0 0/1 Packet loss status While displaying a packet loss. 17-25