Icom ID-51A PLUS2 Advanced Owners Manual - Page 126
Setting the duplex direction, Entering the frequency offset
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Previous view 9 D-STAR OPERATION ■■Entering information into Repeater List DDNew repeater entry (Continued) 10. Setting the duplex direction • "DUP-" is automatically set when the access re- peater frequency is entered in [9. Entering the access repeater frequency]. • If necessary, you can change the duplex direction. # 9 Push D-pad() to select "DUP," and then push Dpad(Ent). D-pad (Ent) () $0 Push D-pad() to select the duplex direction. • OFF: Turn the duplex function OFF. For a simplex operation, this item MUST be set to "OFF." • DUP-: The transmit frequency shifts down from the receive frequency by the offset amount. • DUP+: The transmit frequency shifts up from the receive frequency by the offset amount. $1 After setting, push D-pad(Ent). 11. Entering the frequency offset • The offset value* is automatically set when the ac- cess repeater frequency is entered in [9. Entering the access repeater frequency]. *The default value differs, depending on the transceiver version. • If necessary, you can change the frequency offset. $ 2 Push D-pad() to select "OFFSET FREQ," and then push D-pad(Ent) to enter the frequency offset edit mode. • A cursor appears and blinks. $3 Rotate [DIAL] to enter the frequency offset. $4 Push to move the cursor backward, or push to move the cursor forward. $5 R epeat steps $3 and $5 to enter the frequency offset. $6 A fter entering, push D-pad(Ent). ☞ Continued on the next page. 9-31