Icom ID-51A PLUS2 Advanced Owners Manual - Page 226
Memory scan
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
Previous view 13 SCAN OPERATION ■■Memory scan Repeatedly scans all programmed Memory channels. There two types of scan in the memory mode; Memory scan and memory bank scan. • Channels set as "PSKIP" or "SKIP" are skipped during a scan. • Two or more memory channels, which are not set as skip channels, must be programmed into start a memory scan. DDMemory (skip) scan The memory channels set as "PSKIP" or "SKIP" skip channels are not scanned. qqPush [M/CALL] one or more times to select the Memory mode. wwHold down [SCAN] for 1 second. eeP ush D-pad() to select the scan type. • ALL : Full scan • BAND : Band memory scan • MODE : Mode memory scan • DUP : Duplex scan (p. 13-2) (Appears only when duplex is set on the chan- nel.) • TONE : Tone scan (For tone scanning) D-pad (Ent) () rrPush D-pad(Ent) to start the scan. • If desired, rotate [DIAL] to switch the scanning direction during a scan. • The scan resumes even while the MENU screen is displayed. ttTo cancel the scan, hold down [SCAN] for 1 second. • Pushing [CLR] also cancels the scan. [DIAL] Push [M/CALL] . Hold down [SCAN] for 1 second. Push D-pad() to select, then push D-pad(Ent). Blinks Blinks When a signal is received. TIP: Holding down [SCAN] and then rotating [DIAL] also selects the scan type. The scan immedi- ately starts when [SCAN] is released. Blinks The S-meter shows the received signal strength. Blinks Memory channel number 13-9