Icom ID-51A PLUS2 Advanced Owners Manual - Page 284
Repeat Time, TX Monitor, <<Single TX>>, <<Repeat TX>>
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 284 highlights
Previous view 16 MENU SCREEN ■■Voice TX items (Continued) Repeat Time (Default: 5sec) Voice TX > TX Set > Repeat Time Set the repeat interval to between 1 and 15 seconds (in 1 second steps). The transceiver repeatedly transmits the recorded voice audio at this interval. NOTE: The recorded voice audio is repeatedly transmitted for up to 10 minutes. Even if 10 minutes passes while transmitting, the complete voice audio is transmitted. TX Monitor Voice TX > TX Set > TX Monitor Turn the TX Monitor function ON or OFF. • OFF: The TX voice audio is not heard from the speaker. • ON: The TX voice audio is heard from the speaker. (Default: ON) Voice TX > TX Set > The transceiver transmits the recorded voice audio once. • To cancel the voice transmission, push [CLR] . TIP: You can transmit the recorded voice audio also from the QUICK MENU screen. (p. 17-3) Voice TX > TX Set > The transceiver repeatedly transmits the recorded voice audio for up to 10 minutes at the specified interval in the Repeat Time item. • To cancel the voice transmission, push [CLR] . TIP: You can transmit the recorded voice audio also from the QUICK MENU screen. (p. 17-3) NOTE: • The recorded voice audio is repeatedly transmitted for up to 10 minutes. Even if 10 minutes passes while transmitting, the complete voice audio is transmitted. • One of the following steps will cancel the transmission. - Push [PTT]. - Turn OFF the power, then turn it ON again. - Push any key (except for [POWER]). - Rotate [DIAL]. 16-29