Intel SR1530HCLRNA User Guide - Page 111
Removing Blower Bracket with System Blowers from Server, System SR1530CL/SR1530CLR
![]() |
UPC - 735858197274
View all Intel SR1530HCLRNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
6. Remove the two screws that secure the blower bracket in place. Save these screws. You will re-install them later (see letter "A" in the following figure). Remove the blower cable from beneath the clip at the front of the blower bracket (see letter "B"). Lift the blower bracket from the server. Lift the bracket at an angle, the front of the bracket first, to clear the hard disk drive brackets (see letter "C"). A B C AF000990 Figure 88. Removing Blower Bracket with System Blowers from Server System (SR1530CL/SR1530CLR) Server System User Guide 89
![](/manual_guide/products/intel-sr1530hclrna-user-guide-7bee60b/111.png)
Server System User Guide
89
6.
Remove the two screws that secure the blower bracket in place. Save these screws.
You will re-install them later (see letter “A” in the following figure).
Remove the blower cable from beneath the clip at the front of the blower bracket
(see letter “B”).
Lift the blower bracket from the server. Lift the bracket at an angle, the front of the
bracket first, to clear the hard disk drive brackets (see letter “C”).
Figure 88. Removing Blower Bracket with System Blowers from Server
System (SR1530CL/SR1530CLR)
AF000990
A
C
B