Intel SR1530HCLRNA User Guide - Page 38
DIMM A3 and DIMM B3: Populate these sockets after DIMM A1, DIMM B1
UPC - 735858197274
View all Intel SR1530HCLRNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
A minimum of one 256-MB FBDIMM is required in DIMM socket A1 or B1. This uses single-channel interleave. However, for dual-channel interleave, providing optimum performance, a minimum of two FBDIMMs should be installed in DIMM sockets A1 and B1. Except for the option of installing a single DIMM in socket A1 or B1, DIMMs must be installed in pairs and populated as follows: • DIMM A1 and DIMM B1: Populate these two sockets together first • DIMM A2 and DIMM B2: Populate these sockets in addition to DIMM A1 and DIMM B1 if four DIMMs are to be used • DIMM A3 and DIMM B3: Populate these sockets after DIMM A1, DIMM B1, DIMM A2, and DIMM B2 have been populated • FBDIMMs must meet the following requirements: - Use only FBDIMM 667-MHz fully buffered, registered DIMM modules. - Use only FBDIMMs that comply with the JEDEC Revision 2.0 specifications. - Use only 240-pin DIMMs. For a complete list of supported memory DIMMs, see the links under "Server System References" on page ix. 16 Server System User Guide