Intel SR1530HCLRNA User Guide - Page 90
Removing a PCI Add-in Card
![]() |
UPC - 735858197274
View all Intel SR1530HCLRNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
8. Re-install the screw you removed in step 5. See letter "A" in the figure. B A C AF000983 Figure 68. Installing an Add-In Card 9. Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 64. 10. Install the server system cover. For instructions, see "Installing the Server System Cover" on page 30. 11. Plug all peripheral devices and the AC power cable into the server. Removing a PCI Add-in Card 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover" on page 28. 4. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 63. 5. Remove the screw at the rear of the riser assembly. See letter "A" in Figure 69. Save this screw. You will use it later. 6. Pull the add-in card from the socket in the riser assembly. You may need to wriggle the card from front to back to remove it, but use caution to not twist or bend the card. See letter "B" in the figure. 7. Install a filler panel over the opening at the rear of the riser assembly. See letter "C" in the figure. 68 Server System User Guide
![](/manual_guide/products/intel-sr1530hclrna-user-guide-7bee60b/90.png)