Intel SR1530HCLRNA User Guide - Page 52
Installing the Server System Cover
![]() |
UPC - 735858197274
View all Intel SR1530HCLRNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
5. (SR1530HCL/SR1530HCLS and SR1530HCLR/SR1530HCLSR) Remove the four screws at the front of the chassis (see letter "A" in the following figure). Push rearward on the blue grip point at the front of the server. Slide the cover back until it stops and then lift cover upward to remove it (see letter "B"). B A AF001615 Figure 21. Removing the Server System Cover (SR1530HCL/SR1530HCLS and SR1530HCLR/SR1530HCLSR) Installing the Server System Cover 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. (SR1530CL/SR1530CLR) Place the cover over the server system so that the side edges of the cover sit just inside the server system sidewalls. Slide the cover forward (see letter "A" in the following figure). Tighten the screw at the rear of the server (see letter "B"). Install the two screws at the front of the server (see letter "C"). 30 Server System User Guide
![](/manual_guide/products/intel-sr1530hclrna-user-guide-7bee60b/52.png)