Intel SR1530HCLRNA User Guide - Page 118
Removing the Rack Handles
![]() |
UPC - 735858197274
View all Intel SR1530HCLRNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Removing the Rack Handles 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel" on page 26. 4. Remove the two screws holding the rack handle in place, and remove the rack handle from the server system as shown in the figure below. AF001204 Figure 96. Removing the Rack Handle 5. Repeat step 4 on the opposite side of the server. 6. Optional: Install the front bezel, if desired. For instructions, see "Installing the Front Bezel" on page 27. 7. Plug all peripheral devices and the AC power cable into the server. 96 Server System User Guide
![](/manual_guide/products/intel-sr1530hclrna-user-guide-7bee60b/118.png)