Intel SR1530HCLRNA User Guide - Page 85
Installing and Removing the PCI Riser Assembly
![]() |
UPC - 735858197274
View all Intel SR1530HCLRNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
9. Store the brackets and interposer board for future use. 10. Optional: Install the front bezel. For instructions, see "Installing the Front Bezel" on page 27. 11. Install the server system cover. For instructions, see "Installing the Server System Cover" on page 30. Installing and Removing the PCI Riser Assembly Caution: The PCI riser assembly is NOT hot-swappable. Before removing or replacing the PCI riser assembly, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Removing the PCI Riser Assembly 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover" on page 28. 4. Disconnect any cables attached to any add-in cards. 5. Lift the riser assembly up to remove it. Use caution to gently ease the riser card from the add-in card slot so you do not damage the slot or the riser card. AF000982 Figure 64. Removing PCI Riser Assembly from the Server System Server System User Guide 63
![](/manual_guide/products/intel-sr1530hclrna-user-guide-7bee60b/85.png)