Intel SR1530HCLRNA User Guide - Page 76

Installing the Optical Drive into the Server System SR1530CL, SR1530CLR,

Get Intel SR1530HCLRNA - Server System - 0 MB RAM PDF manuals and user guides
UPC - 735858197274
View all Intel SR1530HCLRNA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

9. Slide the optical drive assembly in through the front of the chassis, as shown by letter "A in the following figure. Secure the optical drive to the chassis with a screw (see letter "B"). Route the power cable through the clip in front of the system fans and connect it to the power connector on the optical drive (see letter "C"). Connect the data cable to the optical drive and to the IDE connector on the server board (see letter "D"). D B C A C D AF000980 Figure 50. Installing the Optical Drive into the Server System (SR1530CL/ SR1530CLR) 10. Install the PCI cooling fan onto the mounting pegs that are located behind the optical drive bay. The fan label should face the rear of the system. See letter "A" in the following figure. A AF000989 Figure 51. Installing PCI Cooling Fan (SR1530CL/SR1530CLR) 11. Install the server system cover. For instructions, see "Installing the Server System Cover" on page 30. 12. Optional: Install the front bezel. For instructions, see "Installing the Front Bezel" on page 27. 54 Server System User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
54
Server System User Guide
9.
Slide the optical drive assembly in through the front of the chassis, as shown by
letter “A in the following figure. Secure the optical drive to the chassis with a screw
(see letter “B”). Route the power cable through the clip in front of the system fans
and connect it to the power connector on the optical drive (see letter “C”). Connect
the data cable to the optical drive and to the IDE connector on the server board (see
letter “D”).
Figure 50. Installing the Optical Drive into the Server System (SR1530CL/
SR1530CLR)
10.
Install the PCI cooling fan onto the mounting pegs that are located behind the
optical drive bay. The fan label should face the rear of the system. See letter “A” in
the following figure.
Figure 51. Installing PCI Cooling Fan (SR1530CL/SR1530CLR)
11.
Install the server system cover. For instructions, see
“Installing the Server System
Cover” on page 30
.
12.
Optional: Install the front bezel. For instructions, see
“Installing the Front Bezel”
on page 27
.
A
B
D
C
D
C
AF000980
AF000989
A