Intel SR1530HCLRNA User Guide - Page 31
Hard Disk Drives, Slimline Optical Drive
![]() |
UPC - 735858197274
View all Intel SR1530HCLRNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Hard Disk Drives The Intel® Server System SR1530CL/SR1530CLR and Intel® Server System SR1530HCL/SR1530HCLR provide six SATA ports and one IDE connection. The six SATA ports are located near the front left side of the server board. An IDE device can be connected to the standard IDE connector located near the SATA ports. The Intel® Server System SR1530HCLS/SR1530HCLSR provides two SATA and four SAS ports as well as one IDE connection. The two SATA and four SAS ports are located near the front left side of the server board. An IDE device can be connected to the standard IDE connector located near the SATA ports. Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a maximum ambient temperature of 45o C. Note: The Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS and the Intel® Server System SR1530CLR / SR1530HCLR / SR1530HCLSR do not support all SAS/SATA hard drives. See "Server System References" on page ix for an Internet link to a list of supported hardware. Slimline Optical Drive One slimline drive carrier is included with your server system; the optical drive must be purchased separately. Note: The Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS and the Intel® Server System SR1530CLR / SR1530HCLR / SR1530HCLSR do not support all slimline optical drives. See "Server System References" on page ix for an Internet link to a list of supported hardware. Intel provides accessory kits for these drives. For installation instructions for an optical drive, see "Installing or Removing a Slimline Optical Drive" on page 51. Server System User Guide 9
![](/manual_guide/products/intel-sr1530hclrna-user-guide-7bee60b/31.png)