Intel SR1530HCLRNA User Guide - Page 65

Locating Drive Positions SR1530CL/SR1530CLR, Removing Drive Carrier

Get Intel SR1530HCLRNA - Server System - 0 MB RAM PDF manuals and user guides
UPC - 735858197274
View all Intel SR1530HCLRNA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

HDD 0 HDD 1 AF001177 Figure 35. Locating Drive Positions (SR1530CL/SR1530CLR) 5. HDD1 location only: Slide the power cables from the cable clip that is located on the top of the hard drive carrier. 6. Remove the screw that secures the hard drive bracket to the chassis (see letter "A" in the following figure). Save this screw. You will use it later to reinstall the drive assembly. Lift the drive carrier from the chassis (see letter "B"). A B ChFarsosnist AF001050 Figure 36. Removing Drive Carrier from Server System (SR1530CL/ SR1530CLR) 7. Position the drive with the drive connectors facing up, as shown in the following figure. Set the drive carrier over the drive (see letter "A"). The data and power connectors must be positioned so they are accessible through the cut-out, as shown by letter "B". Use the four screws provided to attach the drive to the carrier (see letter "C"). Server System User Guide 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
Server System User Guide
43
Figure 35. Locating Drive Positions (SR1530CL/SR1530CLR)
5.
HDD1 location only: Slide the power cables from the cable clip that is located on
the top of the hard drive carrier.
6.
Remove the screw that secures the hard drive bracket to the chassis (see letter "A"
in the following figure). Save this screw. You will use it later to reinstall the drive
assembly. Lift the drive carrier from the chassis (see letter “B”).
Figure 36. Removing Drive Carrier from Server System (SR1530CL/
SR1530CLR)
7.
Position the drive with the drive connectors facing up, as shown in the following
figure. Set the drive carrier over the drive (see letter “A”). The data and power
connectors must be positioned so they are accessible through the cut-out, as shown
by letter “B”. Use the four screws provided to attach the drive to the carrier (see
letter “C”).
AF001177
HDD 0
HDD 1
AF001050
B
A
Chassis
Front