Intel SR1530HCLRNA User Guide - Page 83

Removing a Slimline Optical Drive SR1530HCL, SR1530HCLS and SR1530HCLR/SR1530HCLSR

Page 83 highlights

14. Optional: Install the front bezel. For instructions, see "Installing the Front Bezel" on page 27. 15. Install the server system cover. For instructions, see "Installing the Server System Cover" on page 30. Removing a Slimline Optical Drive (SR1530HCL/ SR1530HCLS and SR1530HCLR/SR1530HCLSR) 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover" on page 28. 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel" on page 26. 5. Disconnect the optical drive power and data cables (see letters "A" and "B" in the following figure). Remove the screw that secures the optical drive bracket to the server chassis (see letter "C"). Save this screw. You will reinstall it later. Slide the optical drive out through the front of the system (see letter "D"). A B C D AF000960 Figure 61. Removing Optical Drive from Server System (SR1530HCL/ SR1530HCLS and SR1530HCLR/SR1530HCLSR) Server System User Guide 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194

Server System User Guide
61
14.
Optional: Install the front bezel. For instructions, see
“Installing the Front Bezel”
on page 27
.
15.
Install the server system cover. For instructions, see
“Installing the Server System
Cover” on page 30
.
Removing a Slimline Optical Drive (SR1530HCL/
SR1530HCLS and SR1530HCLR/SR1530HCLSR)
1.
Observe the safety and ESD precautions at the beginning of this book. See
“Safety
Information” on page iii
.
2.
Power down the server and unplug all peripheral devices and the AC power cable.
3.
Remove the server system cover. For instructions, see
“Removing the Server
System Cover” on page 28
.
4.
Remove the front bezel if it is installed. For instructions, see
“Removing the Front
Bezel” on page 26
.
5.
Disconnect the optical drive power and data cables (see letters “A” and “B” in the
following figure). Remove the screw that secures the optical drive bracket to the
server chassis (see letter “C”). Save this screw. You will reinstall it later. Slide the
optical drive out through the front of the system (see letter “D”).
Figure 61. Removing Optical Drive from Server System (SR1530HCL/
SR1530HCLS and SR1530HCLR/SR1530HCLSR)
C
D
AF000960
B
A