Intel SR1530HCLRNA User Guide - Page 63
Removing the Heat Sink and Processor
UPC - 735858197274
View all Intel SR1530HCLRNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
AIRFLOW 3 2 1 4 FCrohnatssis AF001049 Figure 34. Installing the Heat Sink 5. Reinstall and reconnect any parts you removed or disconnected to reach the processor sockets. 6. Install the server system cover. For instructions, see "Installing the Server System Cover" on page 30. Removing the Heat Sink and Processor 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover" on page 28. 4. Loosen the four captive screws on the corners of the heat sink. 5. Twist the heat sink slightly to break the seal between the heat sink and the processor. 6. Lift the heat sink from the processor. If it does not pull up easily, twist the heat sink again. Do not force the heat sink from the processor. Doing so could damage the processor. 7. Lift the processor lever. 8. Raise the CPU load plate. 9. Remove the processor. Server System User Guide 41