Intermec PM4i PM4i Mid-Range Printer User's Manual - Page 105
Troubleshooting Printer Problems and Finding Solutions, IPL Error Messages continued - replacement printhead
View all Intermec PM4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Chapter 4 - Troubleshooting and Maintaining the Printer IPL Error Messages (continued) Message Description Ready-to-Work Error Indicator Status Number IP configuration error. The printer is trying to Blinking acquire an IP address from the network. Wait for the printer to complete the task before taking any action. No Printhead Printhead not found Off Rebooted Off Initializing Off Printer crash. In most instances, when the printer Off crashes, the screen is reset which causes the Intermec Ready-to-Work indicator to turn off. Printer turned off Off Maintenance Off Psu Over Power supply over temperature Off Temp Printhead Hot The printhead is overheated and needs to Off cool down. Wait for printing to resume automatically. Troubleshooting Printer Problems and Finding Solutions Use this section to find possible solutions to printer problems. Print Quality Problems and Possible Solutions Problem Possible Solution The printout is weak, overall. Try these possible solutions in order: • Make sure that your media setting is appropriate for the type of media you are using. • The contrast may be too low. Try increasing the contrast. • The printhead pressure may be too low. Increase the printhead pressure. For help, see "Adjusting the Printhead Pressure" on page 102. • Replace the printhead. For help, see "Replacing the Printhead" on page 111. The printout is weaker on one side. Adjust the pressure arm. For help, see "Adjusting the Pressure Arm" on page 98. PM4i Mid-Range Printer User's Manual 91