Intermec PM4i PM4i Mid-Range Printer User's Manual - Page 117
To adjust the printhead pressure, To return the printhead pressure to the factory default setting
View all Intermec PM4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Chapter 4 - Troubleshooting and Maintaining the Printer To adjust the printhead pressure 1 Using a slotted screwdriver, turn the adjustment screw clockwise for more pressure and a darker printout (+) or counterclockwise for less pressure (-) and a lighter printout. Adjustment screw 2 Print testprint labels to check the print quality. For help, see "Printing a Test Label" on page 37. To return the printhead pressure to the factory default setting • Tighten the screw (+) as far as you can, and then loosen it (-) four full turns. PM4i Mid-Range Printer User's Manual 103
Chapter 4 — Troubleshooting and Maintaining the Printer
PM4i Mid-Range Printer User’s Manual
103
To adjust the printhead pressure
1
Using a slotted screwdriver, turn the adjustment screw clockwise
for more pressure and a darker printout (+) or counterclockwise
for less pressure (-) and a lighter printout.
2
Print testprint labels to check the print quality. For help, see
“Printing a Test Label” on page 37
.
To return the printhead pressure to the factory default setting
•
Tighten the screw (+) as far as you can, and then loosen it (-) four
full turns.
Adjustment
screw