Intermec PM4i PM4i Mid-Range Printer User's Manual - Page 137
Self-Adhesive Labels, Liner b, Media Width Including Liner a, Label Length d, Label Gap e
![]() |
View all Intermec PM4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Self-Adhesive Labels Media Width Including Liner (a) Measurement Maximum Minimum Value 114.3 mm (4.50 in) 25.0 mm (1.00 in) Appendix A - Specifications Liner (b) The backing paper must not extend more than a total of 1.6 mm (0.06 in) outside the labels and should protrude equally on both side. Recommended minimum transparency: 40% (DIN 53147). Label Width Excluding Liner (c) Measurement Maximum Minimum Value 112.7 mm (4.43 in) 23.8 mm (0.94 in) Label Length (d) Measurement Maximum Minimum Value Dependent on SDRAM size 8.0 mm (0.32 in) Note: Under ideal circumstances, a minimum label length of 4 mm (0.16 in) could be used. It requires the sum of the label length (d) and the label gap (e) to be larger than 7 mm (0.28 in), that batch printing is used, and that no pull back of the media is performed. Intermec does not guarantee that such short labels will work, but it is up to users to test this in their unique application. Label Gap (e) Measurement Maximum Recommended Minimum Value 21.3 mm (0.83 in) 3.0 mm (0.12 in) 1.2 mm (0.05 in) PM4i Mid-Range Printer User's Manual 123
![](/manual_guide/products/intermec-pm4i-pm4i-midrange-printer-users-manual-4b45517/137.png)