Intermec PM4i PM4i Mid-Range Printer User's Manual - Page 111
Adjusting the Printer - factory defaults
View all Intermec PM4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Chapter 4 - Troubleshooting and Maintaining the Printer Resetting the printer also does not change the selected printer language (Fingerprint, IPL, ZSim, or DSim). There are two ways to reset the printer: • Insert a special CompactFlash memory card and restart the printer. • Use the printer's keypad. To reset the printer using the keypad 1 Turn off the printer. 2 Open the right cover and lift the printhead. 3 Turn on the printer and press and hold the I key until the printer beeps. 4 Quickly press the following keys in sequence: D U U L The following message appears: Factory Default? Enter=Yes ESC=No 5 Within 10 seconds, press E to reset the printer to its factory default settings. The parameters are reset and the printer continues the normal startup process. If you do not press E within 10 seconds, the normal startup continues and the printer is not reset. Adjusting the Printer You may need to adjust your printer to accommodate your printing needs or improve performance. You can adjust the: • pressure arm. • label stop sensor (LSS) position. • printhead pressure. • ribbon break shaft. • label taken sensor. PM4i Mid-Range Printer User's Manual 97