Intermec PM4i PM4i Mid-Range Printer User's Manual - Page 68
To con the printer to use WPA-PSK or WPA2-PSK mode, To con the printer to use WPA or
View all Intermec PM4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Chapter 2 - Connecting the Printer To configure the printer to use WPA-PSK or WPA2-PSK mode 1 Send the following commands to login as an admin and set the SSID: .x,su -p pass admin ws,SSID,xxxxx where xxxxx can be from 0 to 32 alphanumeric characters. To enter non-alphanumeric octets, use "%nn," where nn is two hexadecimal digits representing the value of the character Note: The default password for logging in as an admin is "pass." If you have changed the password, you need to use your password instead of "pass." 2 Send one of the following commands to turn on WPA or WPA2 authentication. Send the WPA-PSK or WPA2-PSK command to set a pre-shared key: ws,WPA,OFF ws,WPA2,ON ws,WPA_PSK, xxxxxxxxxx where xxxxxxxxxx is a value between 8 and 64 characters. 3 Send the following command to activate the settings: ws,ACTIVE,1 To configure the printer to use WPA or WPA2 Enterprise mode 1 Send the following commands to login as an admin and set the SSID: .x,su -p pass admin ws,SSID,xxxxx where xxxxx can be from 0 to 32 alphanumeric characters. To enter non-alphanumeric octets, use "%nn," where nn is two hexadecimal digits representing the value of the character Note: The default password for logging in as an admin is pass. If you have changed the password, you need to use your password instead of pass. 54 PM4i Mid-Range Printer User's Manual