Intermec PM4i PM4i Mid-Range Printer User's Manual - Page 121
Cleaning the Exterior of the Printer, Cleaning the Media Guides
![]() |
View all Intermec PM4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Chapter 4 - Troubleshooting and Maintaining the Printer Follow these guidelines for cleaning the printer: • Always remove the power cord before cleaning. • Never spray the printer. Protect it from water when cleaning the premises. • Never use any sharp tools for removing stuck labels. The printhead and rollers are delicate. Cleaning the Exterior of the Printer Clean the exterior of the printer as needed. To clean the exterior of the printer • Wipe external surfaces with a soft cloth slightly moistened with water or a mild detergent. Cleaning the Media Guides Both parts of the label stop sensor, which controls the media feed, are covered by plastic guides. The guides are transparent to allow the light to pass between the two parts of the label stop sensor. These areas must be kept clean from dust, stuck labels, and adhesive residue. If your printer starts to feed labels in an unexpected way, pull out the upper guide check for objects, such as dust, adhesive residue, or labels, that may be blocking the beam of light. If necessary, clean the guides. Isopropyl alcohol [(CH 3)2CHOH; CAS 67-63-0] is a highly flammable, moderately toxic, and mildly irritating substance. PM4i Mid-Range Printer User's Manual 107
![](/manual_guide/products/intermec-pm4i-pm4i-midrange-printer-users-manual-4b45517/121.png)