Intermec PM4i PM4i Mid-Range Printer User's Manual - Page 51

Chapter 1 - Using the Printer Printing a Test Label You can print a test label (perform a testprint) to: • make sure that your printer is working properly. • get your printer's setup, hardware, and network information. • get RFID tag information. • check print quality and determine which adjustments to make. To perform a testprint 1 Press T to enter the Setup menu, and use the keypad to go to the TESTPRINT menu: • If you are running Fingerprint, go to SETUP > PRINT DEFS > TESTPRINT. • If you are running IPL, go to SETUP > TEST/SERVICE > TESTPRINT > CONFIG. 2 Select a testprint to perform. For more information, see the next tables. Fingerprint Testprint Options Testprint Description Diamonds Chess Bar Codes #1 Bar Codes #2 Setup Info Prints a diamond pattern. Prints a chess board pattern. Prints a horizontal set of bar codes. Prints a vertical set of bar codes. Contains current configuration parameters stored in the printer's memory, defined pages, defined formats, defined graphics, defined fonts, and any installed printer options. Hardware Info Contains printer memory information; printer mileage; printhead settings; firmware checksum, program, and version number. RFID Test Label Prints an RFID test label that includes the tag type name. Network Info Contains WINS name, MAC address, IP selection, IP address, netmask, default router, name server, mail server, primary WINS server, secondary WINS server, and network statistics. PM4i Mid-Range Printer User's Manual 37