Intermec PM4i PM4i Mid-Range Printer User's Manual - Page 37
Loading Media for Cut-Off Printing
View all Intermec PM4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 1 - Using the Printer Loading Media for Cut-Off Printing You can install the automatic paper cutter option to cut off the media. Cut-off printing can be used for non-adhesive continuous stock and self-adhesive labels with liner (cut only liner between labels). The cutter option: • is designed for paper-based media with a thickness between 60 and 175 μm, roughly corresponding to a paper weight of 60 to 175 grams/m2 (basis weight 40 to 120 lb). • should not be used to cut through labels, because the adhesive sticks to the shears, which can damage the cutter. • is held by a latch inside the media compartment and can be tilted forward to facilitate loading media. • has a switch that prevents it from operating when it is in the open position. • can be fitted with an optional tray for collecting cutoff labels. • requires the front door to be removed. You can also install an optional label taken sensor so that the next copy in the batch is not printed until the current copy is removed. For more information, see "Accessories for the Printer" on page 129. PM4i Mid-Range Printer User's Manual 23