Intermec PM4i PM4i Mid-Range Printer User's Manual - Page 139
Tickets With Gaps Gap Stock, LSS Detection Position c, Detection Slit Length d, Media Width
View all Intermec PM4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Tickets With Gaps (Gap Stock) Media Width (a) Measurement Maximum Minimum Value 114.3 mm (4.50 in) 25.0 mm (1.00 in) Appendix A - Specifications Copy Length (b) Measurement Value Maximum length between slots Dependent on SDRAM size Minimum length between slots 8.0 mm (0.32 in) Note: Under ideal circumstances, a minimum ticket length of 4 mm (0.16 in) could be used. It requires the sum of the copy length (b) and the detection slit height (e) to be larger than 7 mm (0.28 in), that batch printing is used, and that no pull back of the media is performed. Intermec does not guarantee that such short tickets will work, but it is up to users to test this in their unique application. LSS Detection Position (c) This position is variable. For help, see "Adjusting the Label Stop Sensor" on page 99. Detection Slit Length (d) The length of the detection slit (excluding corner radii) must be a minimum of 2.5 mm (0.10 in) on either side of the LSS detection position (c). Detection Slit Height (e) Measurement Maximum Recommended Minimum Value 21.3 mm (0.83 in) 1.6 mm (0.06 in) 1.2 mm (0.05 in) PM4i Mid-Range Printer User's Manual 125