Invacare SOLARA3G Owners Manual - Page 114

Securing the Wheelchair, Tilt Lock Out

Page 114 highlights

16 TRANSPORT READY OPTION Securing the Wheelchair This wheelchair is to be used only with Wheelchair Tie-down and Occupant Restraint Systems (WTORS) that have been installed in accordance with the manufacturer's instructions and SAE J2249.  A copy of SAE J2249 Wheelchair Tie-down and Occupant Restraint Systems (WTORS) for use in Motor Vehicles can be obtained from: SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, (877) 606-7232 or (724) 776- 4970. Attach WTORS to the tie-down brackets in accordance with the manufacturer's instructions and SAE J2249. Tilt Lock Out 1. Tilt wheelchair until horizontal lines on tilt angle indicator are aligned with the dot on the rocker tube. Refer to Engaging Tilt-In-Space on page 74 and Detail "A" in FIGURE 3. 2. Pull release barrel out (Detail "B"). 3. Rotate tie down bracket counterclockwise. 4. Position mounting hole in tie down bracket on anchor pin (Detail "C"). 5. Repeat STEPS 2-4 for remaining tie down bracket. Invacare® Solara®3G/Spree 3G Wheelchair 114 Part No 1154295

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124

16
TRANSPORT READY OPTION
Invacare® Solara®3G/Spree 3G Wheelchair
114
Part No 1154295
Securing the Wheelchair
This wheelchair is to be used only with Wheelchair Tie-down and Occupant Restraint Systems (WTORS) that have been installed in accordance with
the manufacturer's instructions and SAE J2249.
Attach WTORS to the tie-down brackets in accordance with the manufacturer's instructions and SAE J2249.
Tilt Lock Out
1.
Tilt wheelchair until horizontal lines on tilt angle indicator are aligned with the dot on the rocker tube. Refer to Engaging Tilt-In-Space
on page 74
and Detail “A” in FIGURE 3.
2.
Pull release barrel out (Detail “B”).
3.
Rotate tie down bracket counterclockwise.
4.
Position mounting hole in tie down bracket on anchor pin (Detail “C”).
5.
Repeat STEPS 2-4 for remaining tie down bracket.
A copy of SAE J2249 Wheelchair Tie-down and Occupant Restraint Systems (WTORS) for use in Motor Vehicles can be
obtained from: SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, (877) 606-7232 or (724) 776-
4970.