Invacare SOLARA3G Owners Manual - Page 72
Installing/Replacing Seat Positioning Straps
View all Invacare SOLARA3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
9 BACK/SEAT Adjustable Angle Stroller Handle Button Hinge Arm FIGURE 6 Adjusting the Adjustable Angle Stroller Handles 9.6 Installing/Replacing Seat Positioning Straps Installing 1. Remove the hex screw and locknut that secures the back cane to the back plate. 2. Position the seat positioning strap against the back plate. 3. Install the hex screw through the seat positioning strap, coved spacers and back cane. 4. Securely tighten the seat positioning strap to the wheelchair with the locknut. 5. Repeat STEPS 1-4 for opposite side. Back Plate Seat Positioning Strap Hex Screw Back Cane Locknut Coved Spacers Replacing 1. Remove the hex screw, locknut and seat positioning strap from the back plate of the wheelchair frame. FIGURE 7 2. Discard existing seat positioning strap. 3. Install the new seat positioning strap to the wheelchair. Refer to Installing/Replacing Seat Positioning Straps on page 72. Invacare® Solara®3G/Spree 3G Wheelchair 72 Installing/Replacing Seat Positioning Straps Part No 1154295