Invacare SOLARA3G Owners Manual - Page 45
Adjusting Footplate Height and Calfpad Height/Depth, Adjusting the Footplate Height, Adjusting
![]() |
View all Invacare SOLARA3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
7.6 Adjusting Footplate Height and Calfpad Height/Depth 7 FRONT RIGGINGS Adjusting the Footplate Height 1. Loosen locknut and washer securing the slide tube to the elevating legrest. 2. Reposition footplate to desired height securely tighten locknut and washer. 3. If necessary, repeat STEPS 1-2 to adjust remaining footplate height. Adjusting Calfpad Height 1. Loosen the mounting bolt and washer that secure the calfpad bracket to the elevating legrest assembly. 2. Slide the calfpad bracket up or down until the desired calfpad height is obtained. 3. Tighten the mounting bolt and washer securing the calfpad bracket to the elevating legrest assembly. 4. If necessary, repeat STEPS 1-3 to adjust remaining calfpad bracket. Adjusting Calfpad Depth 1. Remove the mounting screw, spacer and locknut that secure the calfpad to the calfpad bracket. 2. Insert mounting screw through one of four calfpad bracket mounting holes. 3. Using the mounting screw spacer and locknut, secure the calfpad to the calfpad bracket. 4. If necessary, repeat STEPS 1-3 to adjust remaining calfpad assembly. Calfpad Spacer Calfpad Bracket Mounting Holes Calfpad Bracket Mounting Bolt and Washer Elevating Legrest Assembly Mounting Screw Locknut and Washer Slide Tube Locknut Footplate FIGURE 7 Adjusting Footplate Height and Calfpad Height/Depth Part No 1154295 45 Invacare® Solara®3G/Spree 3G Wheelchair
![](/manual_guide/products/invacare-solara3g-owners-manual-09b30c5/45.png)