Invacare SOLARA3G Owners Manual - Page 38
Front Riggings
![]() |
View all Invacare SOLARA3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
7 FRONT RIGGINGS 7 Front Riggings ƽ WARNING After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur 7.1 Installing/Removing Footrests This procedure applies to the lift off footrest assembly and elevating legrest. Installing 1. Turn footrest to the side (open footplate is perpendicular to the wheelchair). 2. Insert the footrest assembly mounting pin into the mounting tube of the wheelchair frame. 3. Rotate the footrest towards the inside of the wheelchair until it locks into place. 4. The footplate will be on the inside of the wheelchair when locked in place. 5. Repeat STEPS 1-3 for the other footrest assembly. 6. If necessary, adjust the footrest height. Refer to Adjusting Footrest Height on page 39 or Adjusting Footplate Height and Calfpad Height/Depth on page 45. Removing 1. Push the footrest release lever inward while rotating the front rigging outward. 2. Lift the footrest assembly out of the mounting pin of the wheelchair frame. 3. Repeat STEPS 1-2 for opposite side, if necessary. Only the swing away footrest is shown. The lift off footrest assembly and elevating legrest install/remove in the same manner. Invacare® Solara®3G/Spree 3G Wheelchair 38 Part No 1154295
![](/manual_guide/products/invacare-solara3g-owners-manual-09b30c5/38.png)