Invacare SOLARA3G Owners Manual - Page 78
Adjusting Hublock Cables, DETAIL
View all Invacare SOLARA3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
10 TILT 10.3 Adjusting Hublock Cables ƽ WARNING DO NOT adjust the hublock cables while the cables are coiled up. The adjustment will be too tight when the cable is straightened and the tilt mechanism will not lock and hold its position, possibly causing injury. 1. Lift up on the hublock lever to test the hublock. If the cable is too loose, the hublock will not work. 2. Perform one of the following: A. Loosen the cable locking nut that secures the cable adjusting nut in place. B. Turn cable adjusting nut one of two ways: • To Tighten - Turn the cable adjusting nut clockwise. DO NOT overtighten the cable adjusting nut (FIGURE 2). • To Loosen - Turn the cable adjusting nut counterclockwise (FIGURE 2). C. While holding the cable adjusting nut in place, tighten the cable locking nut against the cable adjusting nut. Invacare® Solara®3G/Spree 3G Wheelchair 78 Hublock Lever Hublock Cable Cable Adjusting Nut DETAIL "A" FIGURE 3 Adjusting Hublock Cables Part No 1154295