Invacare SOLARA3G Owners Manual - Page 81

Adjusting Lower Tilt Locking Collar, DETAIL

Get Invacare SOLARA3G PDF manuals and user guides View all Invacare SOLARA3G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

10 TILT Adjusting Lower Tilt Locking Collar  This procedure limits the amount of tilt the wheelchair may have. If adjusting the angle the wheelchair returns to. Refer to Adjusting Upper Tilt Locking Collar. on page 79. 1. Loosen the set screw that secures the tilt locking collar to the tilt slide (Detail "A"). 2. Repeat STEP 1 for opposite side of wheelchair.  To determine tilt angle relative to the seat frame, place a magnetic protractor (available at any hardware store) on the back and adjust the back until the magnetic protractor reads desired angle of tilt. 3. Tilt the wheelchair to the desired angle of tilt. 4. Position the two tilt locking collars against the bearing housing.  Before tightening, ensure that the two tilt locking collars are at the same position on the tilt slide. 5. Securely tighten the two set screws of the tilt locking collars (Detail "A"). DETAIL "A" Tilt Slide Part No 1154295 Lower Tilt Locking Collar Set Screw Bearing Housing FIGURE 5 Adjusting Lower Tilt Locking Collar 81 Invacare® Solara®3G/Spree 3G Wheelchair

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
10
TILT
Part No 1154295
81
Invacare® Solara®3G/Spree 3G Wheelchair
Adjusting Lower Tilt Locking Collar
1.
Loosen the set screw that secures the tilt locking collar to the tilt slide (Detail “A”).
2.
Repeat STEP 1 for opposite side of wheelchair.
3.
Tilt the wheelchair to the desired angle of tilt.
4.
Position the two tilt locking collars against the bearing housing.
5.
Securely tighten the two set screws of the tilt locking collars (Detail “A”).
FIGURE 5
Adjusting Lower Tilt Locking Collar
This procedure limits the amount of tilt the wheelchair may have. If adjusting the angle the wheelchair returns to. Refer to
Adjusting Upper Tilt Locking Collar.
on page 79.
To determine tilt angle relative to the seat frame, place a magnetic protractor (available at any hardware store) on the back
and adjust the back until the magnetic protractor reads desired angle of tilt.
Before tightening, ensure that the two tilt locking collars are at the same position on the tilt slide.
Set
Screw
Lower Tilt
Locking Collar
Tilt Slide
Bearing
Housing
DETAIL “A”