Invacare SOLARA3G Owners Manual - Page 54

Replacing Conventional Armrest Pads, Installing/Removing T-Arms, Installing T-Arms

Get Invacare SOLARA3G PDF manuals and user guides View all Invacare SOLARA3G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

8 ARMS 8.4 Replacing Conventional Armrest Pads 1. Remove the mounting screws that secure the existing armrest pad to the armrest assembly. 2. Install new armrest pad and securely tighten with the existing mounting screws. Armrest Assembly Mounting Screws Armrest Pad FIGURE 5 Replacing Conventional Armrest Pads 8.5 Installing/Removing T-Arms Installing T-Arms 1. Position the T-Arm over the T-Arm socket on the wheelchair frame.  Make sure the locking lever is towards the front of the wheelchair. 2. Slide T-Arm into T-Arm socket until the locking lever is in the slot in the T-Arm socket and an audible "click" is heard. 3. Pull up on T-Arm to make sure T-Arm is locked in place..  If the T-Arm does not slide in the T-Arm socket as desired, adjust the T-Arm socket. Refer to Adjusting T-Arm Sockets. on page 59. 4. Adjust the T-Arm for desired height, width and depth, if necessary. Refer to Adjusting The T-Arms on page 56. 5. Repeat STEPS 1-4 for opposite side of wheelchair. Invacare® Solara®3G/Spree 3G Wheelchair 54 Part No 1154295

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
8
ARMS
Invacare® Solara®3G/Spree 3G Wheelchair
54
Part No 1154295
8.4
Replacing Conventional Armrest Pads
1.
Remove the mounting screws that secure the existing armrest pad
to the armrest assembly.
2.
Install new armrest pad and securely tighten with the existing
mounting screws.
FIGURE 5
Replacing Conventional Armrest Pads
8.5
Installing/Removing T-Arms
Installing T-Arms
1.
Position the T-Arm over the T-Arm socket on the wheelchair frame.
2.
Slide T-Arm into T-Arm socket until the locking lever is in the slot in the T-Arm socket and an audible "click" is heard.
3.
Pull up on T-Arm to make sure T-Arm is locked in place..
4.
Adjust the T-Arm for desired height, width and depth, if necessary. Refer to Adjusting The T-Arms
on page 56.
5.
Repeat STEPS 1-4
for opposite side of wheelchair.
Armrest Pad
Armrest
Assembly
Mounting
Screws
Make sure the locking lever is towards the front of the wheelchair.
If the T-Arm does not slide in the T-Arm socket as desired, adjust the T-Arm socket. Refer to Adjusting T-Arm Sockets.
on
page 59.