Invacare SOLARA3G Owners Manual - Page 85
Wheels/forks
![]() |
View all Invacare SOLARA3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
5. Adjust the wheel locks. Refer to Wheel Lock Adjustment on page 88. Only 12-inch rear wheel is shown. All other wheels will install/remove in the same manner. 12 WHEELS/FORKS Rear Wheel Locking Pins Detent Pin Quick-Release Axle Wheelchair Frame Axle Mounting Plate FIGURE 1 Installing/Removing Rear Wheels Permanent Axle To remove rear wheels, reverse this procedure. 1. Remove the permanent axles from the packaged container. 2. Install permanent axle through lock washer and the rear wheel and axle plate. 3. Securely tighten the wheel to the wheelchair frame with locknut. Only 12-inch rear wheel is shown. All other wheels will install/remove in the same manner. 4. Repeat STEPS 2-3 for other rear wheel assembly. 5. Adjust the wheel locks. Refer to Adjusting The Quick-Release Axle on page 86. Part No 1154295 85 Invacare® Solara®3G/Spree 3G Wheelchair
![](/manual_guide/products/invacare-solara3g-owners-manual-09b30c5/85.png)