Invacare SOLARA3G Owners Manual - Page 40

° MFX, 90°, 70° LIFT and 90° LIFT Footrests.

Get Invacare SOLARA3G PDF manuals and user guides View all Invacare SOLARA3G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

7 FRONT RIGGINGS 4. Securely tighten the hex screw and coved spacer. 5. Install the footrest assembly onto the wheelchair. Refer to Installing/Removing Footrests on page 38. 6. Repeat STEPS 1-5 for the opposite side of the wheelchair, if necessary. Hex Screw Footrest Upper Support Coved Spacer Mounting Tube Footrest FIGURE 2 Adjusting Footrest Height - 60°, 70° and 70° Taper 70° MFX, 90°, 70° LIFT and 90° LIFT Footrests. 1. Remove any accessories that are attached to the footrests. 2. Remove the socket bolt, coved washer and locknut that secure the footplate to the footrest support. 3. Reposition the footplate to the desired height. 4. Reinstall the socket bolt through the mounting holes of the footplate and footrest support. ƽ WARNING DO NOT overtighten socket bolt and locknut. Footrest MUST be able to rotate upward from the horizontal to the vertical position. 5. Secure the footplate to the footrest support with the coved washer and locknut. Invacare® Solara®3G/Spree 3G Wheelchair 40 Part No 1154295

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
7
FRONT RIGGINGS
Invacare® Solara®3G/Spree 3G Wheelchair
40
Part No 1154295
4.
Securely tighten the hex screw and coved spacer.
5.
Install the footrest assembly onto the wheelchair. Refer to Installing/Removing Footrests
on page 38.
6.
Repeat STEPS 1-5 for the opposite side of the wheelchair, if necessary.
FIGURE 2
Adjusting Footrest Height - 60°, 70° and 70° Taper
70° MFX, 90°, 70° LIFT and 90° LIFT Footrests.
1.
Remove any accessories that are attached to the footrests.
2.
Remove the socket bolt, coved washer and locknut that secure the footplate to the footrest support.
3.
Reposition the footplate to the desired height.
4.
Reinstall the socket bolt through the mounting holes of the footplate and footrest support.
5.
Secure the footplate to the footrest support with the coved washer and locknut.
±
WARNING
DO NOT overtighten socket bolt and locknut. Footrest MUST be able to rotate upward from the horizontal to the vertical
position.
Footrest
Mounting
Tube
Coved
Spacer
Hex Screw
Footrest Upper
Support