Invacare SOLARA3G Owners Manual - Page 88

Wheel Locks/Anti-Tippers

Get Invacare SOLARA3G PDF manuals and user guides View all Invacare SOLARA3G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

13 WHEEL LOCKS/ANTI-TIPPERS 13 Wheel Locks/Anti-Tippers ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely otherwise injury or damage may occur. DO NOT attempt to stop a moving wheelchair with wheel locks. Wheel locks are not brakes. 13.1 Wheel Lock Adjustment Push to Lock or Pull to Lock Wheel locks  When changing the position of the rear wheels, the wheel locks MUST be repositioned. Before adjusting or replacing the wheel lock assemblies, ensure that the tires are inflated to the recommended p.s.i located on the side wall of the tire. 1. Loosen, but DO NOT remove the two socket screws that secure the wheel lock assembly to the wheellock mounting bracket. 2. Measure the distance between the wheel lock shoe and the rear wheel. 3. Slide the wheel lock assembly along the wheel lock mounting bracket until the measurement is between 5/32 and 5/16-inches. 4. Securely tighten the two socket screws. 5. Repeat STEPS 1-4 for the opposite wheel lock. 6. Engage the wheel locks and push against the wheelchair to determine if the wheel locks engage the rear wheels enough to hold the wheelchair. 7. If the wheel locks DO NOT hold the wheelchair, repeat STEPS 1-6 until wheel lock engagement holds the wheelchair. Invacare® Solara®3G/Spree 3G Wheelchair 88 Part No 1154295

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
13
WHEEL LOCKS/ANTI-TIPPERS
Invacare® Solara®3G/Spree 3G Wheelchair
88
Part No 1154295
13 Wheel Locks/Anti-Tippers
13.1
Wheel Lock Adjustment
Push to Lock or Pull to Lock Wheel locks
1.
Loosen, but DO NOT remove the two socket screws that secure the wheel lock assembly to the wheellock mounting bracket.
2.
Measure the distance between the wheel lock shoe and the rear wheel.
3.
Slide the wheel lock assembly along the wheel lock mounting bracket until the measurement is between 5/32 and 5/16-inches.
4.
Securely tighten the two socket screws.
5.
Repeat STEPS 1-4 for the opposite wheel lock.
6.
Engage the wheel locks and push against the wheelchair to determine if the wheel locks engage the rear wheels enough to hold the wheelchair.
7.
If the wheel locks DO NOT hold the wheelchair, repeat STEPS 1-6 until wheel lock engagement holds the wheelchair.
±
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely -
otherwise injury or damage may occur.
DO NOT attempt to stop a moving wheelchair with wheel locks. Wheel locks are not brakes.
When changing the position of the rear wheels, the wheel locks MUST be repositioned.
Before adjusting or replacing the wheel lock assemblies, ensure that the tires are inflated to the recommended p.s.i located
on the side wall of the tire.