Invacare SOLARA3G Owners Manual - Page 80
and adjust the back until the magnetic protractor reads desired angle of tilt.
![]() |
View all Invacare SOLARA3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
10 TILT 2. Repeat STEP 1 for opposite side of wheelchair. To determine tilt angle relative to the seat frame, place a magnetic protractor (available at any hardware store) on the back and adjust the back until the magnetic protractor reads desired angle of tilt. 3. Tilt the wheelchair to the desired angle of tilt. The Solara seat frame is at a 5° back angle relative to the ground. 4. Position the two tilt locking collars against the bearing housing. Before tightening, ensure that the two tilt locking collars are at the same position on the tilt slide. 5. Securely tighten the two set screws of the tilt locking collars. Bearing Housing Upper Tilt Locking Collar Set Screw Tilt Slide FIGURE 4 Adjusting Upper Tilt Locking Collar. Invacare® Solara®3G/Spree 3G Wheelchair 80 Part No 1154295
![](/manual_guide/products/invacare-solara3g-owners-manual-09b30c5/80.png)