Kenmore HE2t User Guide - Page 24
Changing Cycles And Options, Status Lights, Pausing Or Restarting - washing machine manual
View all Kenmore HE2t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
• Liquid detergent: Measure the amount of liquid detergent with the measurement device which comes with the detergent. Add no more than the manufacturer's recommended amount. The liquid detergent flows immediately into the washer. • Powdered detergent: Measure the amount of powdered detergent with the measurement device which comes with the detergent. Add no more than the manufacturer's recommended amount. NOTE: Overfilling could cause an oversudsing condition. Chlorine bleach compartment (Letter C in Dispenser Illustration) Add NO MORE THAN 2/3 cup (160 mL) liquid chlorine bleach to this compartment. The bleach will be automatically diluted and dispensed at the best time during the first rinse after the wash cycle. This compartment cannot dilute powdered bleach. • Use only liquid chlorine bleach in this dispenser. Do not use this dispenser to add powdered chlorine or any form of colorsafe bleach to your load. • Always measure liquid chlorine bleach. Use a measuring cup with a pour spout; do not guess. Follow the manufacturer's directions for proper use. • Do not fill beyond the "MAX" level. NOTE: Overfilling could cause garment damage. Fabric softener compartment (Letter D in Dispenser Illustration) Add 1/4 cup (60 mL) liquid fabric softener to this compartment. Fabric softener will be automatically dispensed in the final rinse or in the EXTRA RINSE, if selected. • Do not fill beyond the "MAX" level. PAUSING OR RESTARTING 1. To pause the washer at any time, select PAUSE/CANCEL. 2. To continue the cycle, select and hold START (for approximately 1 second). CHANGING CYCLES AND OPTIONS Not all Options are available with all Cycles. Cycles and Options can be changed anytime before START is selected. To stop a cycle and select a new cycle 1. Select PAUSE/CANCEL once. 2. Select desired cycle. 3. Select the desired OPTIONS. 4. Select and hold START (for approximately 1 second) to restart the washer at the beginning of the new cycle. To cancel a cycle 1. Select PAUSE/CANCEL twice. 2. The washer powers down, the door unlocks, and clothes can be removed. NOTE: If the water level or the temperature is too high, the washer will drain automatically before the door unlocks. To change Options after the cycle has started 1. Select PAUSE/CANCEL once. 2. Select the desired OPTIONS. If the option is not available, the machine will beep. 3. Select and hold START (for approximately 1 second) to continue the cycle. To drain the washer manually 1. Select PAUSE/CANCEL. 2. Select DRAIN/SPIN. 3. Select and hold START (for approximately 1 second) to begin the drain. 4. When the spin is complete, the door unlocks. Items can be removed from the washer. STATUS LIGHTS These lights show which portion of the cycle the washer is operating. They also indicate when you can add an additional item to the wash cycle and when the controls are locked. 3-6