Kenmore HE2t User Guide - Page 84

ERROR HISTORY DISPLAY When the press and hold entry method is used and successfully completed: • The control will respond by turning on all lights for 5 seconds. After 5 seconds all lights should turn off and the most recent error code is displayed. • All of the cycle lights will flash and the error code will be displayed on the status lights. • The next most recent error code is to be displayed. • If there is no error code to display, or is the last one, then all lights should turn off for 0.5 seconds and then all turn on for 5 seconds. At the end of 5 seconds the lights will turn off and the control will advance to the automated test. HISTORY OVERVIEW TEST PROGRAM Indication Whirlpool Duet Sport Whirlpool Duet Sport Ht Rinse/Spin Rinse/Spin Control Action Door locks. Actuators to be Checked Door lock system Clean Washer Delicate Clean Washer Distribution system is set to CLEAN position. Fill by cold water inlet valve (4 liters). Delicate/Hand Wash Distribution system is set to MW position. Fill by hot water inlet valve to Level_wash Quickwash Normal/Casual Quickwash Normal/Casual Drum executes reversing movement at wash speed (30 sec). Drum executes reversing movement at wash speed (30 sec). Dispenser motor Dispenser contact Cold water inlet valve Dispenser motor Dispenser contact Hot Water inlet valve Pressure switch: Level_wash Motor Motor Control (MCU) Heater (if equipped) Motor Motor Control (MCU) Heavy Duty Whitest Whites Heavy Duty Drain pump is ON. Whitest Whites Drum rotates counter-clockwise and will ramp to the maximum speed. Drain pump Motor Motor Control (MCU) 6-6