Kenmore HE2t User Guide - Page 28
Extra Rinse, Prewash, Wash Temp, Auto Temp Control, Spin Speed, End of Cycle Signal, Temperature - front load automatic
View all Kenmore HE2t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Extra Rinse An extra rinse can be used to aid in the removal of detergent or bleach residue from garments. This option provides an additional rinse with the same water temperature as in the normal rinse. It is a preset setting for the Whitest Whites cycle. You may select or deselect by pressing EXTRA RINSE. Prewash Use this option for loads of heavily soiled garments that need pretreatment. • Add detergent to the Main Wash Compartment of the dispenser drawer. • Use powdered detergent to keep laundry additives from predispensing into the wash system. This option adds tumbling time prior to the selected main cycle. The washer continues automatically from prewash into the main wash cycle. Wash Temp Each cycle has a preset water temperature setting. To change the water temperature, select the WASH TEMP button until the desired setting is illuminated. Select a water temperature based on the type of load you are washing. Use the warmest wash water safe for fabrics. Follow garment label instructions. The water temperature for all rinse cycles is cold. Cold rinses save energy. Temperature Guide Wash Water Temperature SUPER HOT HOT WARM COLD Suggested Fabrics Sturdy colorfast fabrics Heavy soils Whites and pastels Heavy soils Bright colors Moderate to light soils Colors that bleed or fade Light soils In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils may be difficult to remove. Auto Temp Control ATC (Auto Temp Control) electronically senses and maintains a uniform water temperature. ATC regulates incoming hot and cold water. The ATC is automatically turned ON when a cycle is selected. See Preset Cycle Settings table in "Cycles." • ATC works for the wash temperature with Warm and Cold settings. • The Cold rinse temperatures depend on the cold water at the faucet. Spin Speed Each cycle has a preset SPIN SPEED. To change the spin speed, select the SPIN SPEED button until the desired setting is illuminated. End of Cycle Signal This signal is helpful when you are removing items from the washer as soon as it stops. Select ON or OFF. 3-10