Kenmore HE2t User Guide - Page 82

Some models do not have the display to show, the failure codes. They use the status lights on, - f 33

Page 82 highlights

DISPLAY EXPLANATION AND RECOMMENDED PROCEDURE SUDS LOCK (OVERDOSE OF DETERGENT DETECTED DURING THE WASH CYCLE) If suds are detected continuously by the pressure switch during the drain or spin phases, the washer will fill 4 liters of water and during 5 minutes the unit will rest without tumbling, the water will be drained and it will try to spin or drain again. Possible Causes/Procedure If too much detergent was used: - Run the unit through a RINSE/SPIN cycle. - Run a NORMAL cycle without adding any detergent. This should clear the unit of the excess detergent. 1. Check the drain hose and make sure it is not plugged or kinked. 2. Unplug washer or disconnect power. 3. Check wire harness connections to the drain pump, pressure switch, and Central Control Unit (CCU). 4. Check/clean drain pump filter of foreign objects. 5. Plug in washer or reconnect power. 6. Check drain pump. 7. Check the pressure switch. 8. Verify CCU operation by running a Diagnostic Test or any cycle. Some models do not have the display to show the failure codes. They use the status lights on the touchpad/LED. Failure Codes Status LEDs Duet Sport Duet Sport Ht F/01 Add a Garment Add a Garment F/11 Add a Garment, Wash, Spin Add a Garment, Soak/Prewash, Rinse F/20 Rinse, Cycle Complete Wash, Spin F/21 Add a Garment, Rinse, Cycle Complete Add a Garment, Wash, Spin F/22 Wash, Rinse, Cycle Complete Soak/Prewash, Wash, Spin F/23 Add a Garment, Wash, Rinse, Cycle Complete Add a Garment, Soak/Prewash, Wash, Spin F/24 Spin, Cycle Complete Rinse, Spin F/25 Add a Garment, Spin, Cycle Complete Add a Garment, Rinse, Spin, F/26 Wash, Spin, Cycle Complete Soak/Prewash, Rinse, Spin F/27 Add a Garment, Wash, Spin, Cycle Complete Add a Garment, Soak/Prewash, Rinse, Spin F/28 Rinse, Spin, Cycle Complete Wash, Rinse, Spin F/29 Add a Garment, Rinse, Spin, Cycle Complete Add a Garment, Wash, Rinse, Spin F/30 Wash, Rinse, Spin, Cycle Complete Soak/Prewash, Wash, Rinse, Spin F/31 Add a Garment, Wash, Rinse, Spin, Cycle Complete Add a Garment, Soak/Prewash, Wash, Rinse, Spin F/33 Add a Garment Add a Garment, Cycle Complete rL Wash Soak/Prewash, Cycle Complete 6-4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

6-4
DISPLAY
EXPLANATION AND RECOMMENDED PROCEDURE
SUDS LOCK (OVERDOSE OF DETERGENT
DETECTED DURING THE WASH CYCLE)
If suds are detected continuously by the pressure switch during the
drain or spin phases, the washer will fill 4 liters of water and during
5 minutes the unit will rest without tumbling, the water will be drained
and it will try to spin or drain again.
Possible Causes/Procedure
If too much detergent was used:
Run the unit through a RINSE/SPIN cycle.
Run a NORMAL cycle without adding any detergent.
This should clear the unit of the excess detergent.
1. Check the drain hose and make sure it is not plugged or
kinked.
2. Unplug washer or disconnect power.
3. Check wire harness connections to the drain pump, pressure
switch, and Central Control Unit (CCU).
4. Check/clean drain pump filter of foreign objects.
5. Plug in washer or reconnect power.
6. Check drain pump.
7. Check the pressure switch.
8. Verify CCU operation by running a Diagnostic Test or any
cycle.
Some models do not have the display to show
the failure codes. They use the status lights on
the touchpad/LED.
F/24
Spin, Cycle Complete
Rinse, Spin
Failure
Codes
Status LEDs
Duet Sport
Duet Sport Ht
F/01
Add a Garment
Add a Garment
F/11
Add a Garment, Wash,
Spin
Add a Garment,
Soak/Prewash, Rinse
F/20
Rinse, Cycle Complete
Wash, Spin
F/21
Add a Garment, Rinse,
Cycle Complete
Add a Garment, Wash, Spin
F/22
Wash, Rinse,
Cycle Complete
Soak/Prewash, Wash, Spin
F/23
Add a Garment, Wash,
Rinse, Cycle Complete
Add a Garment,
Soak/Prewash, Wash, Spin
F/25
Add a Garment, Spin,
Cycle Complete
Add a Garment, Rinse, Spin,
F/26
Wash, Spin,
Cycle Complete
Soak/Prewash, Rinse, Spin
F/27
Add a Garment, Wash,
Spin, Cycle Complete
Add a Garment,
Soak/Prewash, Rinse, Spin
F/28
Rinse, Spin,
Cycle Complete
Wash, Rinse, Spin
F/29
Add a Garment, Rinse,
Spin, Cycle Complete
Add a Garment, Wash, Rinse,
Spin
F/30
Wash, Rinse, Spin,
Cycle Complete
Soak/Prewash, Wash, Rinse,
Spin
F/31
Add a Garment, Wash,
Rinse, Spin,
Cycle Complete
Add a Garment,
Soak/Prewash, Wash, Rinse,
Spin
F/33
Add a Garment
Add a Garment,
Cycle Complete
rL
Wash
Soak/Prewash,
Cycle Complete