Kenmore HE2t User Guide - Page 46
Removing The Line Filter & Power Supply Cord
View all Kenmore HE2t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
REMOVING THE LINE FILTER & POWER SUPPLY CORD c) Disconnect the three wire connectors from the line filter. NOTE: Press and release the locking arm on the 2-wire connector to disconnect it from the filter. Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. Line Filter Wire Connectors 1. Unplug washer or disconnect power. 2. Turn off the water supply to the washer. 3. Remove the top cover from the washer (see page 4-2 for the procedure). Line Filter 5. To remove the power supply cord: a) Remove the screw from the green ground wire. b) Pull the connectors with the white and black wires from the line filter terminals. 4. To remove the line filter: a) Remove the T-20 Torx/hex-head screw from the line filter. b) Position the line filter so that the four tabs are aligned with the chassis slots and remove the filter from the washer. Ground Screw Screw 4 Tabs White Wire Black Wire Line Filter 4-8