Kenmore HE2t User Guide - Page 51

Removing The Detergent Dispenser Motor

Get Kenmore HE2t - 3.7 cu. Ft. Front Load Washer PDF manuals and user guides View all Kenmore HE2t manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

REMOVING THE DETERGENT DISPENSER MOTOR 4. Lift the locking tabs and remove the two wire connectors from the detergent dispenser motor terminals. NOTE: When you reconnect the wire connectors, make sure to position the connector with the blue stripe on top. Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 5. Pry up on the cam actuator and unsnap it from the motor shaft. 6. Remove the mounting screw from the detergent dispenser motor and remove the motor. Mounting Screw Motor Shaft 1. Unplug washer or disconnect power. 2. Turn off the water supply to the washer. 3. Remove the top cover from the washer (see page 4-2 for the procedure). Cam Actuator Blue Stripe Detergent Dispenser Motor Dispenser Motor Wire Connectors 4-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
4-13
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug washer or disconnect power.
2.
Turn off the water supply to the washer.
3.
Remove the top cover from the washer
(see page 4-2 for the procedure).
REMOVING THE DETERGENT DISPENSER MOTOR
Detergent Dispenser Motor
4.
Lift the locking tabs and remove the two
wire connectors from the detergent dis-
penser motor terminals.
NOTE:
When
you reconnect the wire connectors, make
sure to position the connector with the
blue stripe on
top.
5.
Pry up on the cam actuator and unsnap it
from the motor shaft.
6.
Remove the mounting screw from the
detergent dispenser motor and remove
the motor.
Blue Stripe
Dispenser Motor
Wire Connectors
Motor Shaft
Mounting Screw
Cam Actuator