Kenmore HE2t User Guide - Page 40
Removing The Console And, The Touchpad/led Assembly - control panel
View all Kenmore HE2t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
REMOVING THE CONSOLE AND THE TOUCHPAD/LED ASSEMBLY 5. To remove the console: a) Pull out and disconnect cable connector UI8 from the central control unit. b) Remove the cable wires from the two central control unit clips. Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 1. Unplug washer or disconnect power. 2. Turn off the water supply to the washer. 3. Remove the three T-20 hex-head Torx screws from the top cover of the washer. 4. Pull back on the cover and release the tabs in the console from the slots in the cover, then lift the cover off the unit. Tabs Console UI8 Central Control Unit Clips c) Pull the detergent dispenser drawer out as far as it will go, then press down on the release tab, and remove the drawer from the unit. Dispenser Drawer Release Tab Top Cover Screws 4-2