Kenmore HE2t User Guide - Page 9

INSTALLATION INFORMATION INSTALLATION REQUIREMENTS TOOLS AND PARTS Gather the required tools and parts before starting installation. The parts supplied are in the washer drum. Tools needed for connecting the water inlet hoses • Pliers (that open to 1-9/16˝ [39.5 mm]) • Flashlight (optional) Tools needed for installation • Open end wrenches 17 mm and 13 mm • Level • Wood block • Ruler or measuring tape Parts supplied If You Have Laundry tub or standpipe taller than 96" (2.4 m) Overhead sewer Floor drain Drain hose too short Water faucets beyond reach of fill hoses You Will Need to Buy Sump pump system (if not already available) Standard 20 gal. (76 L), 30" (76.2 cm) tall drain tub or utility sink and sump pump (available from local plumbing suppliers) Siphon break, Part Number 285834; additional drain hose Part Number 8318155; and connector kit, Part Number 2858835 4 ft (1.2 m) drain hose extension kit, Part Number 2858863 2 longer water fill hoses: 6 ft (1.8 m) Part Number 76314 10 ft (3.0 m) Part Number 350008 A B C D OPTIONS Pedestal You have the option of purchasing pedestals of different heights separately for this washer. You may select a 10˝ (25.4 cm) or a 15.5˝ (39.4 cm) pedestal. Remember that the pedestal will add to the total height of the unit. E A. U-shaped hose form B. Water inlet hoses (2) C. Inlet hose washers (4) D. Transit bolt hole plug E. Beaded tie strap Alternate Parts Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free number on the cover or in the "Assistance or Service" section in the "Use & Care Guide." Optional pedestal Pedestal Height Approximate Height with Washer Color Model Number 10" (25.4 cm) 46" (116.8 cm) White WHP1000SQ 15.5" (39.4 cm) 51.5" (130.8 cm) White WHP1500SQ 2-1