Kenmore HE2t User Guide - Page 70
To replace a basket baffle see the, right column photos, To replace the tub gasket
View all Kenmore HE2t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
24. To replace the tub gasket, pry the gasket out of the slot, and remove it. NOTE: The tub gasket hub is molded into the rear half of the tub. If it is worn and needs to be replaced, replace the rear half of the tub. Rear Of Tub Baffle Mounting Tabs Basket Tabs Basket Hub Baffle Stops Pry Up Basket Tabs Tub Gasket 25. To replace a basket baffle (see the right column photos): a) Position the basket with the baffle to be removed on top. b) Using a flat-blade screwdriver, pry up on the two basket locking tabs so they are above the baffle stops. c) Reach inside the basket, and slide the baffle toward the opening until the tabs are aligned with the large basket slots, then lower the baffle, and remove it from the basket. NOTE: When you reinstall the baffle, make sure that you press the two basket locking tabs down below the baffle stops. Slide Baffle Forward & Lower Tabs Through Slots Baffle Removed 4-32