Kenmore HE2t User Guide - Page 45

Removing The Pressure Switch

Get Kenmore HE2t - 3.7 cu. Ft. Front Load Washer PDF manuals and user guides View all Kenmore HE2t manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

REMOVING THE PRESSURE SWITCH 4. Press and release the two wire connector locking arms and pull the connector off the pressure switch. 5. Pull the pressure hose off the pressure switch fitting. Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. Wire Connector Pressure Switch 1. Unplug washer or disconnect power. 2. Turn off the water supply to the washer. 3. Remove the top cover from the washer (see page 4-2 for the procedure). Pressure Switch Pressure Hose 6. Turn the pressure switch 90° in a clockwise (CW) direction, and align the key on the switch with the slot in the chassis, then remove the switch from the washer. Turn 90° CW To Remove 4-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
4-7
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug washer or disconnect power.
2.
Turn off the water supply to the washer.
3.
Remove the top cover from the washer
(see page 4-2 for the procedure).
REMOVING THE PRESSURE SWITCH
Pressure Switch
4.
Press and release the two wire connec-
tor locking arms and pull the connector
off the pressure switch.
5.
Pull the pressure hose off the pressure
switch fitting.
6.
Turn the pressure switch 90
°
in a clock-
wise (CW) direction, and align the key
on the switch with the slot in the chassis,
then remove the switch from the washer.
Pressure Hose
Wire Connector
Pressure Switch
T
u
r
n
9
0
°
C
W
T
o
R
e
m
o
v
e